November 19, 2026

Callaway Is Spending $15 Million to 3D-Print Driver Faces in Texas. It Says Performance Came First.
Callaway is investing $15 million in a new Texas facility to 3D-print titanium driver components, aiming to unlock clubface designs that traditional manufacturing can't easily produce. The facility is expected to open in 2027, with components planned for 2028 products.
November 19, 2026
Gianni Magliocco | gianni@bigswingmedia.news
Callaway Golf is committing $15 million to a new 3D-printing facility in Fort Worth, Texas, where it plans to manufacture titanium components for golf clubs. The company believes the technology will open up driver-face designs that conventional manufacturing makes difficult or impractical to produce, with the facility scheduled to become operational in 2027 and supply parts for 2028 products.
The location is hard to overlook. CEO Chip Brewer says premium titanium drivers across the industry, including Callaway’s, rely on centrifugal casting overseas. Callaway also expects a substantial import tariff bill. But when Big Swing Media asked whether either factor influenced the Texas investment, the company started with performance.
Meanwhile, Callaway has already put undisclosed 3D-printed parts into competition on tour. A product featuring the technology is due to be announced before the Texas plant opens.
The technology is moving ahead of the factory. How the two connect is less clear.
What Callaway Actually Announced
In a November 6 announcement, Callaway described a new advanced manufacturing facility beside its North America Distribution Center in Fort Worth. It expects the site to become operational in mid-2027 and begin supporting a portion of its U.S. product needs in 2028, initially focusing on custom titanium products.
The facility is intended to do more than turn out parts. Callaway says it will also expand its research and development capabilities, letting engineers test manufacturing approaches that are difficult or impractical with established methods.
And this isn’t a sudden entry into additive manufacturing. The company says it’s been researching the technology for roughly seven years and has produced prototypes and custom models internally since late 2022.
Brewer told analysts on the company’s third-quarter earnings call that Callaway has operated an in-house titanium printer since 2022.
Brewer offered an expansive case for the investment in the formal announcement: “Nobody can create the next generation of performance by relying exclusively on yesterday’s methods.”
The release, however, left something important unsaid. It referred broadly to titanium golf equipment. In response to questions from Big Swing Media, Andy Ellner, of Callaway’s investor relations and corporate communications team, said the focus was driver faces.
And that’s where the manufacturing argument gets interesting.
What Printing Can Do That Casting Cannot
To understand the opportunity, start with how a titanium driver is typically made.
In the centrifugal casting process Brewer described, molten metal is poured into a rotating mold, which uses centrifugal force to distribute the metal before it solidifies. The part is then removed and finished. It is an advanced, highly refined process, not a crude one. Driver heads can also combine a cast body with a separately manufactured face, with components joined and finished afterward.
The limitation is geometric. Some internal shapes are difficult to form, reach or reproduce reliably with molds and subsequent machining. Every extra feature introduces another manufacturing constraint.
Additive manufacturing approaches the problem from the opposite direction. Rather than shape metal around a mold, it builds a component from a digital design, layer by layer. That gives engineers more freedom to specify what goes inside a part, not just what the outside looks like.
For a driver face, one attraction is the possibility of more intricate structures behind the hitting surface, with material placed to influence strength, flexibility or weight distribution. Some of those designs could be impractical to cast and assemble at scale.
That doesn’t mean today’s driver faces have uniform thickness. They don’t. Manufacturers already use sophisticated face-thickness patterns, and Callaway’s current designs are engineered to control how different areas flex.
The promise of printing is a wider range of possible designs, not simply the ability to make one section thicker than another.
But an engineer being able to design something doesn’t automatically mean a golfer will hit it farther or straighter. Callaway has not disclosed a finished face design, performance data or a production cost comparison for the Fort Worth process.
The design opportunity is real. Whether Callaway can turn it into a better driver is still the company’s case to make.
Why Texas, According to Callaway
Andy Ellner’s explanation began with the club, not the factory.
“The main reason for the investment in titanium 3D printing is we believe it will allow us to design driver faces that will provide enhanced performance for the consumer,” he told Big Swing Media.
Then came the advantage of keeping the engineers close to the people making their designs.
“Having R&D near manufacturing was also important to us from a rapid-prototyping and direct learning perspective.”
An engineer can devise a shape on a computer, see how the manufacturing process handles it, test the result and feed that experience back into the next design. The closer those activities are, the more directly production problems can inform the engineering decisions that created them.
Ellner also emphasized the value of controlling the process.
“Also, owning the 3D printing manufacturing process versus having that with a supplier was important to us as well.”
That doesn’t establish that an outside supplier is currently producing these components for Callaway. It establishes that the company wants to own the manufacturing capability itself.
There is a difference between buying a finished part and knowing how to make it. The latter creates expertise that can inform future products, although it also places the burden of developing and scaling that process on Callaway.
Ellner brought his explanation back to the company’s founding philosophy.
“Main reason is to make drivers that fit with Mr. Callaway’s long-standing motto of making DSPD (Demonstrably superior and pleasingly different) product.”
Performance, faster development and control of the process. That’s the order in which Callaway wants the investment understood.
And there is evidence that the technology has progressed beyond the research bench.
“We have had parts in play on tour, that we have not announced that are in fact, 3D printed parts,” Brewer told analysts.
Callaway hasn’t identified those components or said where they were made. But the technology has already reached competitive play, even before the company opens its new manufacturing facility.
What remains to be established is how that experience translates into commercial production.
The Trade Question Callaway Hasn’t Fully Answered
Texas changes more than the distance between an engineer and a manufacturing line. It also changes where the finished component could come from.
On the third-quarter earnings call, Brewer described a manufacturing process extending well beyond Callaway. Premium titanium drivers across the industry are made the same way, he said: “It’s a casting process, and it’s a casting process that’s done overseas.”
He also said the Fort Worth operation would be “the first facility to support U.S. production of golf clubs in many years.”
That matters against the company’s tariff outlook. CFO Brian Lynch told analysts Callaway expects approximately $43 million in gross tariff expense in 2026, compared with $34 million in 2025.
That’s another $9 million in projected gross tariff costs, even as the company prepares to establish domestic manufacturing capacity.
The connection is tempting. But it’s not one Callaway has made.
Ellner acknowledged one geographic advantage: “There will be a benefit of having a US country of origin designation, but 3D printing is a more complicated process than casting.”
So Callaway sees value in a U.S. designation. It has not said that avoiding tariffs motivated the investment, quantified any potential savings or explained precisely what that designation would mean for the components involved.
Big Swing Media followed up to ask whether U.S. country-of-origin status would reduce tariff exposure on those parts or provide some other benefit.
“We haven’t provided any additional color at this point,” Ellner replied.
The tariff bill is real. The U.S. manufacturing benefit is acknowledged. How much, if anything, that changes Callaway’s costs is still unknown.
How the $15 Million Fits the Budget
The investment sounds substantial, but Callaway isn’t presenting it as a departure from its normal spending plans.
Lynch said approximately $40 million remained a reasonable annual capital expenditure run rate, even with the Fort Worth operation. Investments of this scope, he explained, are a regular part of the company’s business.
There is also a timing distinction between announcing a commitment and spending the money.
“Some of the investment will occur in 2026, but as some of it is happening at the end of the year, hard to break out what falls in 2026 versus 2027,” Ellner said.
The project straddles the year-end, and Callaway has not provided a precise allocation between the two years.
The $15 million is the total facility commitment. It isn’t an additional annual spending forecast, and it shouldn’t be treated as one.
The First Product Is Ahead of the Factory
Callaway’s timetable leaves one important question unanswered.
Brewer told analysts that a portion of the company’s 2027 product line would feature 3D-printing technology, with that product due to be announced in early 2027.
The Fort Worth facility, however, isn’t expected to become operational until mid-2027. Its stated role is to support production of parts for early 2028 products.
Big Swing Media asked where the 3D-printed components for the 2027 product would be manufactured.
“For competitive reasons, we cannot answer,” Ellner said.
There are several pieces to the picture, but they don’t yet make a complete manufacturing story.
Callaway has printed titanium in-house since 2022. It has made prototypes and custom models that way. And Brewer has confirmed unannounced printed parts have already reached tour play.
None of that identifies the manufacturing source for the forthcoming commercial product.
A prototype is not necessarily a production component. A part used on tour does not establish that the same process can supply a commercial product line. And Callaway’s decision to own its future manufacturing process doesn’t establish whether an outside supplier is involved today.
The company has said where it intends to build its production capacity. It hasn’t said where the components for its first announced product featuring the technology will come from.
Ellner said further details should emerge “over the coming months as we approach next year’s product launches.”
For a project built partly around taking greater control of manufacturing, that is a meaningful gap in what Callaway has disclosed.
A Different Callaway Is Making This Decision
The investment also comes from a company that looks different from the one investors knew not long ago.
Callaway completed the sale of a 60% interest in its Topgolf and Toptracer businesses to funds managed by Leonard Green & Partners effective January 1, 2026. The transaction was based on an equity valuation of approximately $1.1 billion.
On January 16, the company announced the completion of its return to the Callaway Golf Company name and began trading under the CALY ticker.
It retained an interest in Topgolf, but that stake fell from 40.0% to 39.3% after Topgolf issued additional dilutive units. The holding is accounted for under the equity method.
With Topgolf no longer a consolidated operating business, Callaway’s continuing operations are focused on golf equipment and complementary apparel and gear, including its Odyssey, TravisMathew and OGIO brands.
The company is once again defined much more directly by what it sells to golfers.
That gives a decision about how driver faces are made greater strategic weight. It’s not simply another capital project inside a sprawling golf entertainment business. It’s an investment in the products on which Callaway’s future now depends more directly.
The Proof Still Lies Ahead
Callaway has committed the money, chosen the location and set a target for the facility to begin operating.
It has also explained what it wants from 3D printing: greater design freedom, faster development and better-performing drivers.
The test comes in 2028, when the Texas plant is due to start supplying parts. Callaway will then have to show the process works at production scale. Better ways of making a club still have to produce a better club.
Callaway is clear about why it wants to own this technology.
Where its first commercial 3D-printed components will come from is another matter.
Playing It Forward
Essay originally published in The Met Golfer, March 2023. Special thanks to the Metropolitan Golf Association.
It may be cold and dark out, but the connection the game provides warms the heart and lights the way.
At the end of one year and the beginning of the next, the turn of the calendar signifies the passing of time in a timeless game. I’ve been thinking a lot about that lately. You might remember my last column in the November/December issue was about a friend, who at 69 became Shinnecock’s oldest ever club champion. This issue, I’m going one step beyond, only I’ll let another friend of mine tell the story.
First, though, a little background: The following was written in the fall of 2021 by 91-year old Bruce Zenkel. He is a passionate golfer who lives in Greenwich, Conn. In his younger days, he was a pretty good stick; he’d broken 80 and he has “paint on the board” at Old Oaks Country Club in Purchase, N.Y. – he’s been a member there for 62 years and once won the father-son tournament with son Gary. Bruce believes that more than three decades later, they still own the event’s scoring record.
I got to thinking – if a 69-year-old can give us hope to keep improving and reach new levels, then a man a
generation older than that can help us understand something equally useful: golf never gets old.
A Generational Common Denominator
In the fall of 1948, I was a freshman at the University of Michigan, but not that “fresh” that I and two other newly minted fraternity pledges couldn’t travel to Evanston, Ill., for the Michigan-Northwestern football game at then Dyche Stadium. It was my first away game.
Well, here I am 73 years later and last week, my youngest grandson, Peter Sheldon, attended his first football game at what is now Ryan Field to watch his Northwestern Wildcats open their 2021 season. Later this fall, Northwestern will visit Michigan Stadium for a clash of these two Big 10 rivals and hopefully Peter will visit “The Big House,” getting together with me for this encounter – over seven decades later.
I mention the above since, though rivals on the football field, Peter and I have recently found common ground in another game – the game of golf. Peter and his mom spent late August at our home in Greenwich, Conn. We talked golf, and I offered him the opportunity to take a series of lessons from our head teaching pro, Pat Eggeling. Pat and Petey hit it off in what was his intro to the game. Pat has described his progress thus far as “outstanding.” Not only can he hit the ball out of bunkers, but he’s pretty good at putting contests as well.
Golf has been an important part of my life. I have played the game in more than 30 countries and 35 states. It has been a meeting place for many cherished friendships, business relationships, and even the occasional but very interesting acquaintanceship.
“Golf takes you to visually beautiful places, both inland and seaside, while challenging you to improve – at any stage of your life.”
And so it is that at 19 and 90, I am hopeful that golf can become a “common denominator” for Petey and me ... one that offers him all the benefits and thrills it has offered me.
The Promise of What Lies Ahead
An update: Petey spent a semester of college in Europe, which temporarily put the brakes on his progress, but he’s still loving the game and improving.
Bruce, on the other hand, hasn’t slowed down at all. When the weather is right, he still plays twice a week, sometimes more.
That’s of course not where we are right now though. Winter is cold, but Bruce’s story is like a roaring fireplace. It warms things up, and in these days where darkness comes too early, it’s a reminder that golf can give us light in the promise of what lies ahead.
No matter how old you are.


✓ Exclusive reporting and business intelligence
✓ Insights from 16-time Emmy winner Jimmy Roberts
✓ Expert perspectives from industry leaders
✓ Exclusive quarterly briefings with Jimmy Roberts
Available for a limited time only, subscribe to our twice-weekly Golf Business Intelligence Brief for a discounted rate of $9.99/month or $99/year. Subscription renews at the same price each month or year, depending on the subscription selected.
Purchase Disclosure
By completing your purchase, you agree to enroll in a monthly or annual subscription to The Big Swing Golf Business Intelligence Brief at the current rate of $9.99 a month or $99 a year.Your subscription will automatically renew monthly at $9.99 or annually at $99 unless canceled prior to the renewal date.
You may cancel at any time through your account settings or by contacting customer support. All sales are final and non-refundable except where required by law.
Offer valid for a limited time and may not be combined with other promotions. Limit one per customer.
By subscribing, you agree to our Terms of Service and Subscription Terms.





.jpeg)
